Chili Oil Recipe (How to Make Chili Oil) (2024)

Hi Mike and Patty,
Ralph here from South Africa.
I LOVE your site. These recipes are amazing!

I have a variation of this chili oil which I've evolved from a recipe on another site, which I'd like to share. This is not a 5 minute version, though 🙂

Unfortunately, down here we don't get shallots, so I used red onions, and some spring onion (I think in the US you'd call them green onions... which are apparently NOT exactly the same as scallions, but I'm sure scallions would work fine).
It's also really hard to find a decent variety of chilis other than bird's eye, Jalapeno, Habs and a few others, so I've tweaked the recipe according to what I have managed to get my hands on. In future I will rather get seeds and start growing my own. But for now this is what I used.

Below are the ingredients and their quantities used in my last batch (I weighed and recorded everything as I went along. Please note I'm in South Africa so we use the metric system (liters and grams) so please convert to pounds, ounces, gallons...etc:

2L sunflower cooking oil
76g Serenade chili
39g red Bird's Eye chili
252g green Jalapeno chili
150g dried chili flakes
75g white salad onions (short spring onions, white and green parts - green onions in the US)
Cloves from 4 heads of garlic (+- 300g)
3 red onions (530g)
3 Knorr Chicken stock cubes
1 Knorr beef stock cube
120g brown sugar (not the sticky kind. Same consistency as white sugar, but a light brown, almost caramel colour. That's the sugar we use at home. I'm sure ordinary white sugar would be just fine).
100g sesame seeds (optional for extra crunch and flavour - leave these until very last).

This is the 2nd time I've made this recipe, and this time around I used your recipe and video instructions to roast the chilis beforehand. This is of course optional. I was just intrigued by the idea of different flavours coming out during the roasting.

Chop up the chilis, garlic and onions to a course mixture and set aside.

In a large pot heat the oil on a medium heat. My stove settings go up to 12. I had it up to 5, so it's just below halfway on the dial. (I used a pot because a pan is not deep enough for 2 liters of oil - I'm sure a wok would work, but then cooking time may be reduced... a pot takes a bit longer, I'd think)

When the oil is hot enough, put the dried chili flakes, sugar and broken up stock cubes into the oil and fry for about 5 minutes.

Then add the onion, chili and garlic and fry, stirring often so it doesn't stick.
Fry this for another 25 minutes, so the total cooking time since you added the flakes etc is about 30 minutes.

Then I turned up the heat to 8/12 (2 third heat on the dial) for another 20 minutes (total cooking time so far is around 50 minutes). During this part you need to stir almost constantly as it is possible to burn the mixture. The reason I cranked up the heat on the stove is that it almost crisps the chili mix, which I really love. If you don't care, don't mind, or don't have a full hour, you can take it off the stove at this point. But seriously... leave it on 🙂

And then for the last 10 minutes, add the sesame seeds. The reason I added the sesame seeds so late is because I'm scared of burning them and don't want to ruin the entire batch by putting them in too early and risk burning them. If anyone knows f they can survive longer in hot oil without spoiling or burning, let me know.
But I put in for the last 10 minutes.

That's it. Remove from the stove and let it cool.
I first used a ladle to get the chunky mixture into the jars, filling each one about halfway. Then I shared out the oil to fill each jar.
Seal and put in the fridge.

The only thing that worries me is some of the comments in this post about using within a month or it'll go off. I hope that by keeping it in the fridge, it'll last a bit longer. From the last batch I made, I gave so many away, my remaining jars got used up before a month was up.

Anyway, check it out, play around and have fun.
Thanks for reading this, and thank you for this amazing page!!

REPLY: Ralph, thank you for sharing this. Sounds great! -- Mike from Chili Pepper Madness.

Chili Oil Recipe (How to Make Chili Oil) (2024)

FAQs

What oil is best for chilli oil? ›

The best oil for making chili oil

Since you're cooking the oil at high temperature, you can use oils such as corn oil, canola oil, teaseed oil, or peanut oil. These oils are also known as neutral oils, which means they don't impart strong flavors.

How hot should oil be for chili oil? ›

Heat oil in a small saucepan over medium until it reaches 225 degrees F to 250 degrees F (110 degrees C to 120 degrees C), 3 to 4 minutes.. It's hot enough when a few flakes of crushed red pepper will sizzle in the oil. Pour oil over spices. Let stand until cooled completely, about 1 hour.

What is the chemical formula for chili oil? ›

Capsaicin (trans-8-methyl-N-vanillyl-6-nonenamide) is a fat-, alcohol-, and oil-soluble crystalline, odorless hom*ovanillic acid derivative alkaloid. The molecular formula of capsaicin is C18H27NO3 and its molecular weight is 305.40 g/mol.

How long will homemade chilli oil last? ›

I restock my chili oil every 2-3 months and I always have jars in my fridge ready to go. It lasts in the fridge up to 3 MONTHS and I use it on everything, noodles, wontons, dumplings, eggs, radish cakes, homemade buns, literally EVERYTHING.

What is the strongest chilli oil? ›

Carolina Reaper Chilli Oil is made from top quality Extra Virgin Olive Oil and the hottest chilli in the world, the Carolina Reaper.

What is the famous Chinese chili oil? ›

The product is sold in China and over 30 other countries. Lao Gan Ma is credited with popularizing Chinese chili oil and chili crisp toppings in the Western world, and have inspired many Chinese-American chili-based toppings.

Can I use fresh chilies in chilli oil? ›

The short answer is – yes! You can make hot chili oil using fresh or dried chilies, so it's totally up to you what option you choose.

Which chilli is used in chilli oil? ›

Each different chilli flake will produce a chilli oil with a different colour and flavour. The best one to use in my opinion are Sichuan chilli flakes. These are the ones used in most commercial chilli oils. They produce a deep red colour whilst also providing heat.

What is Japanese chili oil made of? ›

Rayu, aka La-yu, is a pungent Japanese-style chili oil made by infusing sesame oil or other neutral oil with spicy chilies and other aromatics, and often other spices. It adds a wonderful kick of heat and flavor to various dishes, and is a popular dipper and condiment, particularly for dishes like gyoza.

How to tell if chili oil is bad? ›

To determine if your chili oil has gone bad, you'll need to pay attention to the smell and visual aspects. If it smells rancid or off, that's your first sign that it's expired. Additionally, if you notice any discoloration or mold growth, those are sure signs it's time to toss it.

Is homemade chili oil healthy? ›

Is chilli oil healthy? Chilli oil can be healthy in moderation as it contains capsaicin, which may boost metabolism and have some health benefits. However, it's high in calories and should be consumed sparingly.

What are the white specks in chili oil? ›

Well, the sediment is from the onions, ginger, cloves and other ingredients you added to make this incredible chili oil with sediment. Chili oil is not that stuff you see on the shelves of your supermarket in the international aisle. It's doesn't run clear like that.

What oil does chilis use? ›

Many of our foods contain soybean oil and our fried items are prepared in 100% soybean oil.

What oil is good for chili burn? ›

Cooking Oils

"This is much more effective than just rinsing with water, which can actually spread the capsaicin to a larger area on your hands," says Roszkowski. Rub your hands with olive oil or coconut oil for 30 seconds, since "capsaicin is soluble in fat," says Roszkowski.

Is sunflower oil good for making chilli oil? ›

If you are using the oil for cooking, sunflower or groundnut works well, for the table, Olive or Rapeseed oil. Leave oil for a few weeks before testing. Leave longer if you want more heat. You can then either top-up the oil as you use it, or strain-out the flakes to hold the oil at the same heat level.

Is coconut oil good for chili oil? ›

What is the best oil to use for chili oil? - Quora. Any oil that is flavorless is good unless you are looking for that flavor to be a component of the finished product. I prefer peanut oil because of its high smoke point but, coconut, grape seed or avocado oils are all great too.

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 5972

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.